Specifications
Important
-
The following values may vary depending on the operating environment.
General Specifications
| Power supply |
100-240 V AC (50/60 Hz) (The supplied power cord is only for the country or region you purchased.) |
|---|---|
| Power consumption |
When printing (USB connection): Approx. 38 W Standby (USB connection): Approx. 1.2 W *1 Standby (all ports connected): Approx. 2.3 W *1 When power is off: Approx. 0.1 W *2 *1 The wait time for standby cannot be changed. *2 The printer uses a trace amount of power even when turned off. To stop all power consumption, turn off the printer and unplug the power cord. |
| Operating environment |
Temperature: 41 to 95 °F (5 to 35 °C) Humidity: 10 to 90 % RH (no condensation) * The performance of the printer may be reduced under certain temperature and humidity conditions. Recommended conditions: Temperature: 59 to 86 °F (15 to 30 °C) Humidity: 10 to 80 % RH (no condensation) * For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions. |
| Storage environment |
Temperature: 32 to 104 °F (0 to 40 °C) Humidity: 5 to 95 % RH (no condensation) |
| Dimensions (W x D x H) |
28.5 x 17.2 x 11.3 inches (723 x 435 x 285 mm) * With the trays retracted. |
| Weight |
Approx. 71.2 lb (Approx. 32.4 kg) * With the Print Head and ink tanks installed. |
| Printing resolution (dpi) |
2400 dpi horizontally * x 1200 dpi vertically * Prints with a minimum 1/2400 inch dot pitch between ink droplets. |
| Print Head/Ink | Total 18432 nozzles (MBK / PBK / C / M / Y / PC / PM / GY / PGY / R / B / CO each 1536 nozzles) |
| Memory | 1 GB |
Interface
USB and the network can be used at the same time.
You cannot use Wi-Fi and wired LAN at the same time.
| USB |
Hi-Speed USB * * To use Hi-Speed USB, your computer must support Hi-Speed USB. Additionally, the Hi-Speed USB interface is completely backward compatible with USB 1.1, so the printer can be connected even if the computer interface is USB 1.1. |
|---|---|
| LAN |
Wired LAN: IEEE802.3ab (1000BASE-T) / IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T) Wi-Fi: IEEE802.11n / IEEE802.11g / IEEE802.11b / IEEE802.11a / IEEE802.11ac |
Network Specifications
| Communication protocol | SNMP, HTTP, TCP/IP (IPv4/IPv6) |
|---|---|
| Wired LAN specifications |
Supported Standards: IEEE802.3ab (1000BASE-T) / IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T) Transmission speed: 10 Mbps / 100 Mbps / 1000 Mbps (automatically selected) Security: IEEE802.1X (EAP-TLS/EAP-TTLS/PEAP) |
| Wi-Fi specifications |
Supported Standards: IEEE802.11n / IEEE802.11g / IEEE802.11b / IEEE802.11a / IEEE802.11ac Frequency bandwidth: 2.4 GHz / 5 GHz *1 Channels: 2.4 GHz: 1-11 or 1-13 *1 5 GHz: W52, W53, W56, W58 *1 *1 Frequency bandwidth and available channels differ depending on country or region. Effective range: Indoors 164 feet/50 m *2 *2 Varies according to environmental conditions. Security: WPA-PSK (AES) WPA2-PSK (AES) WPA3-SAE (AES) WPA-EAP (AES) *3 WPA2-EAP (AES) *3 WPA3-EAP (AES) *3 *3 Supports IEEE802.1X (EAP-TLS / EAP-TTLS / PEAP) Setup: WPS (push button method/PIN code method) Easy wireless connect |
Paper
For the paper types, size, and weight/thickness that are supported by the printer, see Media Types You Can Use.
For the area that can be printed, see Print Area.
Operating Conditions
If operating conditions of the operating system are high, follow those.
Windows
| Compatible Operating System |
Windows 11, Windows 10, Windows 8.1, Windows 7 SP1 Note: Operation can only be guaranteed on a PC with pre-installed operating system. .NET Framework is required. Printer driver and IJ Printer Assistant Tool support the following OS: Windows Server 2008 R2 SP1, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019 and Windows Server 2022 |
|---|---|
| Amount of hard disk space required for installing the driver |
1.5 GB or more The necessary amount of hard disk space may be changed without notice. |
macOS
| Compatible Operating System | macOS Big Sur 11.7.10 - macOS Sonoma 14 |
|---|---|
| Amount of hard disk space required for installing the driver |
1.5 GB or more The necessary amount of hard disk space may be changed without notice. |
Other Supported OS
|
iOS, iPadOS, Android, Chrome OS Some functions may not be available with the supported OS. |
-
An Internet connection is required to use the Online Manual.
-
To install the software while using Windows, you must have a CD-ROM drive or a network connection.
-
To install the software while using macOS, you must have a network connection.
